Technical Parameter
T Series & W Series
Model | W1 | W2 | W4 | W6 | W8 |
---|---|---|---|---|---|
Rated Power (W) | 75 | 90 | 100 | 130 | 150 |
Max Power (W) | 90 | 100 | 130 | 160 | 180 |
Length (mm) | 1050 | 1200 | 1400 | 1650 | 1850 |
Diameter (mm) | 80 | 80 | 80 | 80 | 90 |
Catalyze | YES | YES | YES | YES | YES |
Life Span (Hours) | 10000 | 10000 | 10000 | 10000 | 10000 |
Warranty (Months) | 18 | 18 | 18 | 12 | 12 |
Wooden Case (cm) | 138x26x27 | 138x26x28 | 159x41x42 | 183x41x42 | 204x44x46 |
Weigth (kg) | 22 | 23 | 59 | 69 | 90 |
Model | T1 | T2 | T4 | T6 |
---|---|---|---|---|
Rated Power (W) | 75 | 90 | 100 | 130 |
Maximum Power (W) | 90 | 100 | 130 | 160 |
Length (mm) | 1100 | 1250 | 1400 | 1650 |
Outer Diameter (mm) | 65 | 65 | 65 | 65 |
Catalytic | YES | YES | YES | YES |
Life Span (Hours) | 8000 | 8000 | 8000 | 8000 |
Warranty (Days) | 300 | 300 | 300 | 300 |
Carton Size (cm) | 118x17x19.5 | 131.6×17.4×18.5 | / | / |
Note:
The extended threaded-tube is recommended when Multi-layer plywood, PVC materials are to cut. It should be installed to avoid the gas inside leaking caused by glue expansion, in the circumstance that the temperature of laser tube heads are increasing due to dust around the working environment.
Installation method:
Unscrew he original threaded-tube, and blow off the dust on the lens with the balloon. Then install the extended threaded-tube. The length can be reserved according to the actual requirement with the pliers cutting from V-groove position.
Model | T1 75-90W L1110 D65, T2 90-100W L1250 D65, T4 100-130W L1400 D65, T6 130-160W L1600 D65, W1 75-90W L1050 D80, W2 90-100W L1200 D80, W4 100-130W L1400 D80, W6 130-160W L1650 D80, W8 150-180W L1850 D90 |
---|